tender · indexed from World Bank Procurement Notices

Solarization of PIU & 08 field offices

World Bank

Published

09 Oct 2026

Deadline

16 Oct 2026

Stage

Tender

Status

Open

Buyer

World Bank

Notice type

Invitation for Bids

Procurement method

Request for Quotations

Reference

PK-PIU SLAD-557654-GO-RFQ

Buyer: World Bank — see their procurement performance.

STEP Reference: PK-PIU SLAD-557654-GO-RFQTo,_________________________Subject: Request for Quotations for Procurement for Solarization of PIU & 07 field officesThe Government of Sindh through Livestock and Fisheries Department is implementing Sindh Livestock and Aquaculture Development Project with financial assistance of the World Bank under International Development Association (IDA) Credit No. 7580-PK.The Sindh Livestock and Aquaculture Development Project (SLADP) aim to promote competitive, inclusive, and climate-resilient growth in Sindh's livestock and aquaculture sectors. Its objectives include increasing production, raising farmers' income, and reducing greenhouse gas emissions. The project also focuses on strengthening the enabling environment for these sectors, supporting the development of inclusive, climate-resilient, and sustainable practices.The project invites sealed quotations for Procurement for solarization of PIU & 08 field offices from reputed bidders/ suppliers/ authorized dealers (NTN and GST registered, active taxpayer) having previous experience of supply of similar goods for the past three years. The specifications for solarization of PIU & 08 field offices.The Subject procurement will be done in accordance with Request for Quotation method using open-market approach outlined in the World Bank Procurement Regulations for IPF borrowers (Fifth edition, revised September 2023).Eligible bidders/ suppliers/ authorized dealers having abovementioned experience and registrations may quote their competitive prices on or before 16th October, 2026 till 17:00 PST.Terms and Conditions: All the bids shall be quoted in Pak rupees.The quoted prices shall be final and non-negotiable.Evaluation and Award of Contract The Contract will be awarded to the eligible, technically qualified and most advantageous bidder(s)/ supplier(s)/ authorized dealers(s).Delivery time: Within 30 calendar days after issuance of purchase order. In case of late delivery by the supplier, late delivery charges @0.1% of Contract award per week not exceeding 10% in total, shall be deducted at the time of payment to the Supplier.Delivery address: PIU-SLADP, A-53/1 Muslim Housing society, Qasimabad, Hyderabad and the field offices located at Mirpurkhas, Tharparkar, Thatta, Larkana, Shaheed Benazirabad, Hyderabad, Khairpur/ Tando Muhammad Khan districts.Mode of payment: Upon receipt of goods and ancillary services and acceptance of consignment in complete lot(s) by the Procuring agency, the payment shall be made within 30 Business days.Taxes: All applicable taxes/ duties shall be included in the quoted price, which will be deducted at source as per government rules.Validity of Quotations: The submitted quotations must be valid for Thirty (30) days.Place of Submission of quotes: PIU- Sindh Livestock & Aquaculture Development Project Livestock & Fisheries Department, Government of Sindh, A-53/1 Muslim Housing Society Qasimabad Hyderabad.Specifications of required goods and their ancillary servicesLot # 01: Solarization of PIU-SLADP Office, Muslim society, Hyderabad, SindhItem # | Description of vaccine with detailed description | QuantityRequired | Rate offered | Total amount01 | Package of 20 KW Hybrid solar system with 32 KW li-ion batteries backup, breakers and allied accessoriesInverters: 10KW Hybrid inverter with IP66 rating (02 units)Single phase, low voltage energy supporting up to 20 KW input, maximum usable input of 16 KW, with at least 02 MPPT inputs (04 strings), Max. charge/ discharge power of 10 KW, li-ion/ lead acid supported battery via BMS connectivity through CAN/ RS485 communication. The inverter must be supported with 220/ 230V, 50/60Hz rated grid frequency, having rated grid input of 45.5A/ 43.5A.Efficiency of inverters: The inverters must not have efficiency <96%.Protection: The inverters must have followed built-in surge, output over current, insulation resistance monitoring, residual current detection, integrated PV switch, DC reverse polarity, protection class I/II & III protections. The inverter must be IP-66 rating, ambient with -25 ~ +60 °C installed with built-in intelligent redundant cooling fan.The inverter must be compatible with NRS 097-2-1, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530, EN 50549-1,MEA, PEA, NBR 16149, NBR 16150, G98, G99, CEI 0-21, NTS 631 Type-A alongside IEC/EN 62109-1/-2, EN 61000-6-2/-3 safety/ EMC standards.Warranty: 5 years or above manufacturer’s warranty within the Pakistan, covering manufacturing defects and component failure under normal use.Batteries: Li-ion 16kWh – 51.2v batteries x 02 units having following specs:Depth of discharge: 100%Discharge voltage (Vdc): 42.5-57.6Charge voltage: 56-56.8Max charge/ discharge current (A): 180/200 Communication: CAN/ RS485Working temperature: 0-55 °CIP Rating: Not below IP-65Certifications: Must meet IEC62619/ IEC63056, UN38.3, EMC/ CECycle life: Not less 8,000Interaction: Display screen/ Bluetooth and WiFiWarranty: 5 years replacement warranty + 5 years extended service support.Solar panels x 24 units645-650w per module, Bi-facial N-typeModule efficiency up to 24.1% enabled by HPBC 2.0 Cell technology: N-type HPBC 2.0 monocrystalline cellsDurability: 3.2 mm tempered anti-reflective glass and anodized aluminum alloy frame, suitable for harsh weather conditionsEfficiency in low light: Excellent low-light performance, maintaining high energy output even in clouded/ shaded conditionsWarranty: 30 years power warranty by manufacturer brandIron frame: fixed iron frame durable for 24 solar plates of 645-650w solar panels, with walkway in 2x3” pipe and 3” dia round pipes of 20 gauge.Allied accessories: Copper wiring, breakers (AC/DC), including all allied accessories, cables and ancillary installation must be included in package.Note: All items quoted under Sr. # 1–5 must be fully compatible and function cohesively as an integrated system. In the event of any incompatibility among the quoted components, the bidder shall be solely responsible for ensuring compliance and delivering a complete, operational package at no additional cost to the purchaser. | 01 packageLot # 02: Solarization of 04 field offices (Tharparkar, Mirpurkhas, Hyderabad and Sujawal)01 | Package of 06 KW Hybrid solar system with 05 KW Li-ion backup, solar panels including frame, breakers and allied accessoriesInverter: 06 KW Hybrid inverter with IP66 rating (01 unit)Single phase, low voltage energy supporting up to 12 KW input, maximum usable input of 9.6 KW, with at least 02 MPPT inputs (02 strings), Max. charge/ discharge current of 135 A, li-ion/ lead acid supported battery via BMS connectivity through CAN/ RS485 communication. The inverter must be supported with 220/ 230V, 50/60Hz rated grid frequency, having rated grid input of 27.3 A / 26.1 A.Efficiency of inverters: The inverters must not have efficiency <96%.Protection: The inverters must have followed built-in surge, output over current, insulation resistance monitoring, residual current detection, integrated PV switch, DC reverse polarity, protection class I/II & III protections. The inverter must be IP-66 rating, ambient with -25 ~ +60 °C installed with built-in intelligent redundant cooling fan.The inverter must be compatible with NRS 097-2-1, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530, EN 50549-1,MEA, PEA, NBR 16149, NBR 16150, G98, G99, CEI 0-21, NTS 631 Type-A alongside IEC/EN 62109-1/-2, EN 61000-6-2/-3 safety/ EMC standards.Warranty: 5 years or above manufacturer’s warranty within the Pakistan, covering manufacturing defects and component failure under normal use.Batteries: Li-ion 05 kWh – 51.2v 104 Ah batteries x 01 units having following specs:Depth of discharge: 100%Discharge voltage (Vdc): 42.5-57.6Charge voltage: 56-56.8Max charge/ discharge current (A): 180/200 Communication: CAN/ RS485Operating temperature: -20-55 °CIP Rating: Not below IP-65Certifications: Must meet UN-38.3, MSDS, CE, CBCycle life: Not less 6,000Interaction: CAN 2.0, RS485, Bluetooth and mobile applicationWarranty: 5 years replacement warranty + 5 years extended service support.Solar panels x 12 units645-650w per module, Bi-facial N-typeModule efficiency up to 24.1% enabled by HPBC 2.0 Cell technology: N-type HPBC 2.0 monocrystalline cellsDurability: 3.2 mm tempered anti-reflective glass and anodized aluminum alloy frame, suitable for harsh weather conditionsEfficiency in low light: Excellent low-light performance, maintaining high energy output even in clouded/ shaded conditionsWarranty: 30 years power warranty by manufacturer brandIron frame: fixed iron frame durable for 24 solar plates of 645-650w solar panels, with walkway in 2x3” pipe and 3” dia round pipes of 20 gauge.Allied accessories: Copper wiring, breakers (AC/DC), including all allied accessories, cables and ancillary installation must be included in package.Note: All items quoted under Sr. # 1–5 must be fully compatible and function cohesively as an integrated system. In the event of any incompatibility among the quoted components, the bidder shall be solely responsible for ensuring compliance and delivering a complete, operational package at no additional cost to the purchaser. | 04 packagesLot # 03: Solarization of 03 field offices (Larkana, Shaheed Benazirabad and Khairpur/ Tando M. Khan)Package of 06 KW Hybrid solar system with 05 KW Li-ion backup, solar panels including frame, breakers and allied accessoriesInverter: 06 KW Hybrid inverter with IP66 rating (01 unit)Single phase, low voltage energy supporting up to 12 KW input, maximum usable input of 9.6 KW, with at least 02 MPPT inputs (02 strings), Max. charge/ discharge current of 135 A, li-ion/ lead acid supported battery via BMS connectivity through CAN/ RS485 communication. The inverter must be supported with 220/ 230V, 50/60Hz rated grid frequency, having rated grid input of 27.3 A / 26.1 A.Efficiency of inverters: The inverters must not have efficiency <96%.Protection: The inverters must have followed built-in surge, output over current, insulation resistance monitoring, residual current detection, integrated PV switch, DC reverse polarity, protection class I/II & III protections. The inverter must be IP-66 rating, ambient with -25 ~ +60 °C installed with built-in intelligent redundant cooling fan.The inverter must be compatible with NRS 097-2-1, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530, EN 50549-1,MEA, PEA, NBR 16149, NBR 16150, G98, G99, CEI 0-21, NTS 631 Type-A alongside IEC/EN 62109-1/-2, EN 61000-6-2/-3 safety/ EMC standards.Warranty: 5 years or above manufacturer’s warranty within the Pakistan, covering manufacturing defects and component failure under normal use.Batteries: Li-ion 05 kWh – 51.2v 104 Ah batteries x 01 units having following specs:Depth of discharge: 100%Discharge voltage (Vdc): 42.5-57.6Charge voltage: 56-56.8Max charge/ discharge current (A): 180/200 Communication: CAN/ RS485Operating temperature: -20-55 °CIP Rating: Not below IP-65Certifications: Must meet UN-38.3, MSDS, CE, CBCycle life: Not less 6,000Interaction: CAN 2.0, RS485, Bluetooth and mobile applicationWarranty: 5 years replacement warranty + 5 years extended service support.Solar panels x 12 units645-650w per module, Bi-facial N-typeModule efficiency up to 24.1% enabled by HPBC 2.0 Cell technology: N-type HPBC 2.0 monocrystalline cellsDurability: 3.2 mm tempered anti-reflective glass and anodized aluminum alloy frame, suitable for harsh weather conditionsEfficiency in low light: Excellent low-light performance, maintaining high energy output even in clouded/ shaded conditionsWarranty: 30 years power warranty by manufacturer brandIron frame: fixed iron frame durable for 24 solar plates of 645-650w solar panels, with walkway in 2x3” pipe and 3” dia round pipes of 20 gauge.Allied accessories: Copper wiring, breakers (AC/DC), including all allied accessories, cables and ancillary installation must be included in package.Note: All items quoted under Sr. # 1–5 must be fully compatible and function cohesively as an integrated system. In the event of any incompatibility among the quoted components, the bidder shall be solely responsible for ensuring compliance and delivering a complete, operational package at no additional cost to the purchaser. | 03 packagesNote: All the above sites/ offices can be visited during the office hours for measurements/ conducting electrical assessment from Monday-Friday.